What's actually being remodeled in Aurora
Aurora is the third-largest city in Colorado, a wide mix of older Original Aurora and Del Mar Parkway stock, 80s–90s subdivisions in central Aurora, and 2000s–2020s master-planned communities in southeast Aurora and along Smoky Hill. Scope varies dramatically by ZIP.
- Builder-grade hollow-core door conversions in 80s–90s central Aurora stock
- Primary-suite low-threshold door conversions
- Newer subdivision door replacements in southeast Aurora
Greater Denver housing stock and conditions
Denver proper holds a dense band of pre-1950 bungalows with original wood entry doors, while Douglas, Arapahoe, and Adams counties are largely 1990-2015 construction.
Altitude and very low humidity shorten cure time for exterior caulking and increase seasonal wood door movement, and the region's expansive clay soils make entry threshold and frame settling more common than elsewhere.
- Bungalow original wood door restoration is a large share of local permitted work
- Frame and threshold projects require extra settling checks because of the region's clay soils
- Low humidity shortens working time for exterior sealant, favoring experienced installers
What a door project costs in Aurora, CO in 2026
Construction costs in Greater Denver run about 9% above the national average. The ranges below take national project anchors and apply that local index, so they reflect what local crews actually quote rather than a national average that fits nowhere.
Denver labor rates run well above national, and installers here plan wider weatherstripping tolerances and more frequent frame shimming than in wetter climates.
Midpoint of the typical range for each project type.
| Project | Greater Denver range | National range |
|---|---|---|
Entry door replacement Single entry door swap, old door and frame out, new prehung unit in. The highest-volume door project in most markets. | $1,500 – $5,000 | $1,200 – $4,500 |
Patio door replacement Sliding or French patio door replacement, including track/frame work and exterior trim. | $1,500 – $6,500 | $1,500 – $6,000 |
Whole-home door replacement All exterior doors replaced in one pass — entry, patio, garage-side, and storm doors as a package. | $3,500 – $13,000 | $3,000 – $12,000 |
Storm door installation Adding or replacing storm doors on existing entry doors for ventilation and weather protection. | $500 – $1,000 | $350 – $900 |
Source: Cost bands: HomeGuide 2024 and Angi 2024 national anchors, indexed with RSMeans city cost index bands and BLS regional trade wage data. Estimates, not quotes.
Permits and code in Colorado
Any Aurora door project that enlarges the rough opening or involves structural header changes needs a permit. In Colorado that goes through the City or county building department.
Typical permit cost for a door project: $150–$500 for a door installation permit. Confirm current fees with your local office before signing a contract, and make sure the contractor pulls the permit, not you.
How Aurora compares with the national picture
The national direction is consistent everywhere: fiberglass overtaking steel for durability, multi-point locks becoming standard for security, energy-efficient glazing for better insulation, and low-threshold accessibility for long-term home value. What changes locally is how much of that work is triggered by failure versus choice, and how much the same scope costs.
Directional national figures. Local mix shifts with housing age and water conditions.
Why the same remodel costs more than it did five years ago.
Frequently asked questions
How much does a door project cost in Aurora, CO?+
Most full remodels in Aurora run $3,500 to $13,000, and a steel-to-fiberglass upgrade typically lands between $1,500 and $5,000. Those bands reflect Greater Denver construction costs, which are about 9% above the national average.
What kinds of door projects are common in Aurora?+
Aurora is the third-largest city in Colorado, a wide mix of older Original Aurora and Del Mar Parkway stock, 80s–90s subdivisions in central Aurora, and 2000s–2020s master-planned communities in southeast Aurora and along Smoky Hill. Scope varies dramatically by ZIP. The most frequent drivers locally are: Builder-grade hollow-core door conversions in 80s–90s central Aurora stock; Primary-suite low-threshold door conversions; Newer subdivision door replacements in southeast Aurora.
Do Aurora homeowners need a permit?+
Yes for structural header changes or enlarging the rough opening. Permits are issued through the City or county building department in Colorado, typically $150–$500 for a door installation permit.
More Aurora and Arapahoe County County resources
Ready to see your remodel profile? DoorGuide is a 2-minute guided conversation, not a contractor form, you'll see your personalized plan before sharing anything. Matching with a local provider is optional.
See your personalized remodel plan in 2 minutes
Tell me a bit about you and I'll tailor the plan to your home and budget. No pressure, no obligation.