Colorado-specific wet-room flooring notes
A wet-room flooring install in Colorado is a permitted project only when drain lines move. Local pricing tracks national ranges - a mid-size bathroom floor lands $700–$1,500 installed for tile with a membrane, less for fiberglass. The below permit and licensing block are Colorado-specific.
- Licensing: Varies by municipality; Denver requires a Class B or C license for most residential door installation projects
- Permit authority: City or county building department
- Typical permit fees: $150–$500 for a door installation permit
How they open, and why that matters
Sliding patio doors glide horizontally on a track, one panel usually fixed and one operable, which means they never swing into the room or the patio. That makes them the practical choice when furniture, walkways, or a tight patio don't leave room for a door to swing.
French (hinged) patio doors swing open like a pair of interior French doors, giving you the full width of the opening to walk through and a tighter, more traditional seal against the frame when latched. But that swing needs clearance on whichever side it opens, indoors or out.
- Sliding: no swing clearance needed, ideal for tight patios and furniture-heavy rooms
- French/hinged: needs 3+ feet of swing clearance, offers a full-width opening when both panels open
- Sliding doors are easier to screen (sliding screen panel) than French doors
- French doors traditionally read as more upscale and formal in design
Cost, installed
Sliding doors are generally the more budget-friendly option because of simpler hardware and fewer moving parts, but the gap narrows with high-end sliders (multi-panel, large-format glass) and widens with premium French door hardware and multi-point locks.
- Sliding patio door (standard, 2-panel): $1,500–$4,500 installed
- French/hinged patio door (standard, 2-panel): $2,000–$6,000 installed
- Multi-panel or large-format sliding door: $4,000–$10,000+ installed
- Impact-rated glass (coastal codes) on either style: add $500–$2,000
| Configuration | Installed range |
|---|---|
| Sliding (standard, 2-panel) | $1,500–$4,500 |
| French/hinged (standard, 2-panel) | $2,000–$6,000 |
| Multi-panel or large-format sliding | $4,000–$10,000+ |
| Impact-rated glass (either style) | +$500–$2,000 |
Energy efficiency and weatherseal
French doors, when properly latched with a multi-point lock, generally achieve a tighter, more consistent compression seal than a sliding door's brush weatherstrip against the track. Over time, sliding door tracks accumulate debris and wear that can degrade the seal more than a hinged door's gasket does.
Both styles are available with double- or triple-pane glass and low-E coatings, which matters more for energy performance than the swing mechanism itself. A high-quality slider with good glass will outperform a cheap French door with poor glass, and vice versa.
Security
Older sliding doors have a reputation for being easy to force off the track or pry open, and that reputation is earned for older or poorly installed units. Modern sliding doors with anti-lift blocks, multi-point locks, and reinforced frames close most of that gap, but a basic builder-grade slider is still a weaker point than a well-built hinged door.
French doors with a multi-point lock engaging at the top, middle, and bottom of the panel are generally considered more resistant to forced entry than a comparable sliding door, since there's no track to lift the panel off of.
- Add an anti-lift block or secondary track lock to any existing sliding door for a low-cost security upgrade
- Multi-point locks are worth the upgrade cost on French doors specifically for security
- Glass break resistance depends on the glass package, not the door style, laminated glass is the stronger option for either
Maintenance and long-term wear
Sliding door tracks need periodic cleaning and occasional roller adjustment or replacement as the rollers wear, a maintenance item hinged doors simply don't have. French door hinges need occasional lubrication and, on heavier doors, periodic adjustment to prevent sagging.
Both styles' weatherstripping needs replacement every several years regardless of style, that's a wear item on any exterior door, not specific to sliding or hinged mechanisms.


Want a personalized flooring plan tailored to your Colorado home? I'll walk you through a 2-minute guided conversation.
See your personalized remodel plan in 2 minutes
Tell me a bit about you and I'll tailor the plan to your home and budget. No pressure, no obligation.
Frequently asked questions
Are sliding doors really less secure than French doors?+
Older or builder-grade sliders can be, mainly because they can be lifted off the track. Modern sliding doors with anti-lift hardware and multi-point locks close most of that gap. If security is the top priority and budget allows, a French door with a multi-point lock is generally the stronger option.
Which is cheaper, sliding or French patio doors?+
Sliding, in most standard configurations, typically $1,500–$4,500 installed versus $2,000–$6,000 for a comparable French door. The gap narrows or reverses with premium multi-panel sliders or budget French doors, so compare specific quotes rather than assuming.
Which one is better for a small patio or deck?+
Sliding, almost always. A French door needs 3+ feet of swing clearance on the outdoor side, which a small deck or patio often doesn't have. A sliding door needs zero swing clearance since the panel moves horizontally along the wall.
Can I replace a sliding door with a French door in the same opening?+
Often yes, if the rough opening size is compatible or can be adjusted, but it usually requires reframing since the two door types have different structural and clearance requirements. Get a contractor to confirm the opening before assuming a straight swap.
Do I need a permit for this project in Colorado?+
Almost always yes if the project changes subfloor framing, drain lines, or structural work. Straight floor-covering replacement over an existing subfloor generally does not. City or county building department.
How do I verify a flooring contractor's license in Colorado?+
Check with Licensed at the city or county level (no state general contractor license). Varies by municipality; Denver requires a Class B or C license for most residential door installation projects. The absence of the required registration is disqualifying regardless of price or reviews.
What do door installation permits typically cost in Colorado?+
$150–$500 for a door installation permit. Fees vary by municipality and the scope of work triggering the permit.
Local guides in Colorado
More Colorado planning guides


Ready to see your remodel profile? DoorGuide is a 2-minute guided conversation, not a contractor form, you'll see your personalized plan before sharing anything. Matching with a local provider is optional.
See your personalized remodel plan in 2 minutes
Tell me a bit about you and I'll tailor the plan to your home and budget. No pressure, no obligation.
Pricing, sources & disclosures+
Pricing source & methodology
Any dollar figures or price ranges shown on DoorGuide are educational reference points, not quotes. National typical mid-range bands are drawn from publicly available door installation cost research and adjusted for regional construction costs using a city-cost-index methodology. Ranges reflect professionally installed projects from licensed door installers, including standard frame prep and removal of the old door, not DIY, material-only, or handyman scopes. Actual pricing depends on door size and type, material tier, frame or sill condition, glass and hardware add-ons, and the installer you choose.
- · Angi (HomeAdvisor), How Much Does It Cost to Install a Door? (2024)
- · HomeGuide, Door Installation Cost (2024 national + regional ranges, by material)
- · Door and Hardware Institute, product & install guidance for entry, patio and interior doors
- · U.S. Census Bureau, American Housing Survey (housing age & characteristics)
- · RSMeans City Cost Index (regional construction-cost adjustment methodology)
Estimates, not quotes
DoorGuide does not perform site visits, measure your openings, or inspect your framing. Any ranges, timelines, or scope descriptions are general guidance to help you compare materials and options before talking to an installer. A binding price requires an in-home measurement and assessment by a licensed professional.
Financing & APR disclosure
Door financing offers are typically advertised as a monthly payment. The figures that determine the true cost are the annual percentage rate (APR), term length, total interest, and any promotional-period terms (e.g., 0% APR for an introductory window that reverts to a higher rate). Always request the Truth-in-Lending disclosure in writing before signing. DoorGuide does not originate loans, broker credit, or make credit decisions. Financing is offered by third-party lenders subject to credit approval and applicable state law.
Licensing & warranty
Door installation is regulated at the state and local level, and some scopes (e.g., structural frame repair, egress or fire-rated door requirements) may require additional permits or licensed trades. Confirm that any installer you hire carries the appropriate licensing and insurance, and provides a written labor + materials warranty before work begins. Requirements differ by state and municipality.
Advertising & matching disclosure
DoorGuide is a free homeowner-education tool. When you complete the guided experience and opt in, we may match you with a vetted local door provider and may receive a referral or revenue-share fee from that provider if a project moves forward. Matching is optional and is never a condition of using the guide or viewing your door profile. DoorGuide is not an installer and does not perform door installation work.
Last reviewed: August 2026. Pricing data is reviewed periodically; the cited sources are the authoritative reference.
